Polyurethane Artifical Grass Backing Sheet  Bonding Adhesive Sealant

1. Description
Flexibond 8260 is a two component polyurethane adhesive used for synthetic turf backing sheet bonding which plays the role of anchoring and protection of the grass.

2. Characteristics
(1) Long pot life under room temperature, cures fast when heating, improve the production efficiency
(2) Slight foaming, good flexibility, resistant to bending
(3) High drawing strength, low adhesive consumption, low comprehensive cost
(4) Good flexibility, resistant to bending
(5) High gloss
(6) Resistant to water, acid, alkali and salt aging
 
3.Technical Data

 
*Testing temperature 23ºC and 50% RH
 
4. Usage
(1) Preparation
     Mix the resin and the hardener in the mixing machine. The adhesive should keep a constant temperature (recommended temperature 25-35ºC) in the mixing machine to ensure the applying stability. The mixing ratio should be corrected with the mixing machine before starting application. 
Note: Sediment in the resin is normal. Mix the resin uniformly before using. 

(2) Substrate Surface Treatment
     The substrate surface should be clean and dry, free of grease, dust and other contaminations. 

(3) Mixing ratio
     Flexibond 8260: Flexibond 8201=6.5-8.5:1 by weight. 
     The mixing ratio varies with the different requirements of adhesive consumption and hardness. If the adhesive consumption is low, in order to achieve a high drawing strength, we recommend mixing ratio 6.5:1; if the adhesive consumption is high, in order to achieve a good flexibility, we recommend mixing ratio 8.5:1. For details, please consult Comens technical department.
     Stir uniformly component A before using it. Mix the two components strictly according to the ratio. Mix for 1-2 more minutes after the adhesive color is uniform.

(4) Adhesive Coating 
The adhesive consumption is 500-1000g per square meter. The consumption varies with the substrates surface structures and different performance requirements. The mixed adhesive should be used up within its pot life.

(5) Curing and Curing Time
The substrates coated with the adhesive needs to be cured. The turf sheet should be rolled after the adhesive surface tack free. The curing rate varies with the temperature. The lower the temperature is, the longer the curing time it takes. The higher the temperature is, the shorter the curing time it takes. Under the temperature 120ºCin the oven, the curing takes 2-5 minutes. 

(6) Cleaning
Recommended cleaning solvent: methylene dichloride, ethyl acetate. 
 
5.Packaging
Component A (Resin): 1625kg/drum
Component B (Hardener): 250kg/drum
The packaging can be adjusted according to customer's requirement. 
 
6.Note
(1) The adhesive sealant should be used up once mixed. The remaining sealant cannot be used if viscosity appears too high.

(2) Do not apply the product together with other adhesives. Please enquire to our technicians if you have such a need.

(3) The information and recommendations related to the application and end-use of COMENS' products are given in good faith based on COMENS' current knowledge and experience of the products when properly stored, handled and applied under normal conditions. This information must on no account be used as a substitute for necessary prior tests which alone can ensure that a product is suitable for a given use, due to the practical differences in materials, substrates and actual site conditions. Users are requested to check that they are in possession of the latest version of this documents and COMENS' is at their disposal to supply any additional information. 

FAQ

1.Are you manufacturer?

Yes. Our company-COMENS, is the only and the largest company producing polyurethane sealant in China. We have three factories in China-two in Beijing and one in Nantong, Jiangsu.

2.Do you accept Private Label?

Yes. We can do OEM for customers.

3.Can I get a sample before order?

Of course. Generally, we provide 1-5 pieces free samples for you test and the courier fee be born by customers. Thank you for your understanding.

4.How to get samples from your company?

Generally, we send samples by TNT, UPS, FedEx.

5.How long you will finish my order?

It is depend on your order quantity. Generally, we just need 5 days to produce 10000 pieces, 600ml sausage after receive your payment.

6. Can I visit to your factory?

Welcome. Please let me know your trip plan, we would like pick you up and book hotel for you.

7.How to contact you?

Welcome to contact us online in Trade manger, SKYPE(xu.ruofei1), WhatsApp (+0086-),E-mail(xrf(AT)co-mens.com)

8.How to find the suitable polyurethane sealant?

Please let me know your application purpose, substrate, application method and all your requirements. We would like give you a recommendation.