86-10-80341725
No. 8, Yanshan Industry Zone, Fangshan District, Beijing, China
Technical Data | |
Appearance | PasteUniform Paste |
Color | Black |
Density | 1.20±0.05kg/l |
Tack free time | 20-40 mins |
Rate of cure | ≥3 mm/24hr |
Work temperature | 5-35°C |
Shore A hardness | ~60 |
Tensile Strength | ≥8 N/mm |
Elongation at break | ≥400% |
Shear strength | ≥5 N/mm |
Tear strength | ≥10 N/mm |
Service temperature | -40°C to +90°C |
Description
Surtek 3668 is a one component, solvent free, high strength polyurethane adhesive sealant. It is non-sag, curing fast, of good initial strength. It does not contain solvent or PVC. And it has good vibration and weather resistance. The product is manufactured in accordance with ISO9001/ISO14001/TS16949.
Characteristics
One component, easy to use
Non-sagging
Fast cure
Solvent free
Aging resistant
Uses
Surtek 3668 is used for windshield direct glazing. It is widely used for structural bonding and installation for windscreen of car, bus, train, boat, etc.
Application Note
1. Use Comensflex Activator to make the substrate surface clean, dry, free of dust or grease.
2. Shake Comensflex Primer bottle to make the material even before using it. Use brush to apply the primer onto the cleaned surface for a thin layer.
3. Apply the sealant after the primer dried. Install the glass before the sealant tack free. The best working temperature is 20-30°C, humidity 50-70%
4. The sealant cures with moisture in the air. The lower the temperature and humidity is, the slower the curing is; and the higher the temperature and humidity is, the faster the curing is. Too high temperature and humidity may cause bubble in the cured sealant.
5. Avoid the adhesive sealant from alcohol, acid, ammonia chemicals. These chemicals will cause the adhesive sealant uncured.
310ml/cartridge or 600ml/sausage
20 pieces for one carton
78 - 133 cartons for one pallet
10 pallets for one 20' GP container
When stored at the recommended conditions in original, unopened containers, this product has a shelf life of 6-9 months. The shelf life of polyurethane sealant is related to the temperature and humidity of the environment.
The recommended storage temperature is 5-25° C, humidity is <50% RH. It is strictly prohibited that the transportation or storage temperature is over 30° C or the humidity is over 80% RH. And high-temperature container transportation is prohibited as well. In the long-time high temperature and high humidity storage environment, the product is easy to get viscous, extrusion will be deteriorated and shelf life will be shortened.
Surtek 3355: General grade(auto glass replacement) | |
Color: | Black |
Density (DIN 53479): | 1.30±0.05kg/l |
Non-sag properties: | Good |
Tack-free time: | 20~60 min |
Rate of cure: | ≥3 mm/24hr |
Shore A hardness (DIN 53505): | 60±5 |
Shear strength (without primer): | ≥2 N/mm2 |
Tensile strength (DIN 53504): | ~ 5 N/mm2 |
Elongation at break (DIN 53504): | 400% |
Tear strength (DIN 53515): | ≥10 N/mm |
Surtek 3356: Higher grade(auto glass replacement) | |
Color: | Black |
Density: | 1.25 ± 0.05 kg/l |
Tack-free time: | 15~35 min |
Rate of cure: | ≥3 mm/24 hrs |
Shore A hardness: | ~ 60 |
Tensile strength: | ≥6 N/mm2 |
Elongation at break: | ~ 300% |
Shear strength: | ≥4 N/ mm2 |
Tear strength: | ≥10 N/ mm |
Surtek 3621: High grade ( bus body joint sealing) | |
Color: | Black, white, grey |
Density: | 1.30 ± 0.05 kg/l |
Tack-free time: | 55 min. |
Curing speed: | 3 mm/24 hrs |
Shore A hardness: | 45 |
Tensile strength: | 2 N/mm2 |
Shear strength: | 1 N/mm2 |
Elongation at break: | ≥400% |
Tear propagation resistance | ≥10 N/ mm |
Beijing Comens New Materials Co., LTD is a listed company in China (“Comens Materials”, Stock Code: 300200.SZ) committed to providing professional solutions for bonding (including lamination, wrapping, etc.), sealing and protection in the field of soft packaging, assembling, construction, furniture and building materials, etc. Series of adhesive, sealant, resin and coating have been developed based on polyurethane and acrylic. With the wide product range, good reputation and high market share in China, Comens has been recognized as a leading manufacturer in China and Asia in the field of polyurethane adhesives and sealants.
Following the mission of “satisfy diversified demand, provide professional service”, Comens is striving to be a worldwide competitor in polyurethane adhesives, sealants and coatings.
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
A:Sample needs 1-3 days, mass production time needs 1-2 weeks.
A: Low MOQ, 1 pc for sample if checking is available
A: We usually ship samples by UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping are optional.
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly the customer confirms the sample and places deposit for formal order.
Fourthly We arrange the production.
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
A: Yes, for cartridge packing is 9 months and sausage packing is 6 months.
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.1%.
Secondly, during the guarantee period, we will send new pu sealant with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
Q9: How to contact us?